THESE ITEMS ARE MADE TO ORDER AND LEAD TIME VARIES DEPENDING ON PART AVAILABILITY - PLEASE CONTACT US FOR UP TO DATE LEAD TIMES 970-242-6166

Build your dream rifle! Red Hawk now offers a full line of completely custom Barreled Actions built by Viking Armament. 

• Uses industry standard barrel twist rate for best performance, unless requested otherwise.
• Leadtime will depend on part availability. Standard lead time is around 14 weeks. Make sure to triple check your specs! Once the build specs have been confirmed, Viking starts the machining process on your barreled action and your order cannot be modified.
• Barreled actions are coated with Cerakote ceramic coating for a top tier finish that will handle the harshest conditions.
• Meraki Machine M1 Muzzle brake included and barrel muzzle is threaded to 5/8-24 tpi to fit aftermarket brakes and suppressors. (1/2-28 for .223 caliber)
• If you are looking for options that are not listed, please contact us at 970-242-6166. We can special order anything you need. 

Why do Red Hawk's Custom Barreled Actions cost more than other competitors?

Not a Pre-fit Barrel! Each barreled action is manually spun and hand fitted to plus or minus one ten thousandth for meticulous precision and accuracy. Each barreled action from our custom collection guarantees correct breech, headspace, and functionality. This is a completely custom chambered barreled action.

Accuracy Guarantee Each barreled action will hold Viking Armaments sub ½ MOA guarantee. We do not ship the barreled action if it does not meet our accuracy guarantee. Period. Keep in mind, this accuracy guarantee is reflected when the complete rifle is properly and professionally assembled. Certain fitments and tolerances involving the stock/chassis, bedding, bottom metal, and other components can affect accuracy. Certain ammunition and hand loads can also affect accuracy if not loaded properly.

THE ORDERING PROCESS

We keep it super simple. Simply select your options, add it to your cart, and checkout. We will then email you a build sheet to verify your options, and that's it. The masters at Viking spin up your barreled action and we ship it to your FFL of choice when it's done. The hardest part of the process will be deciding what stock and accessories you want to complete your build (of course, our experts can help you decide if you run into any questions).

THE COMPONENTS

RECEIVER: STILLER PREDATOR

Designed to be used for both hunting and competition, the Predator action is a 416R stainless steel action with a Remington 700-style footprint. The 223 bolt face uses the Sako style extractor, while the others use a modified M16 type. The Predator has a number of features that factory actions lack. It has an extended magazine well that accommodates Wyatt Outdoors extended magazine boxes for the handloader who likes to seat their bullets longer than factory ammo. It uses the most dependable extractor available today and has an enlarged primary extraction camming surface. It uses #8 screws for scope base mounting. The bolt is forged from a single piece of steel, is hand lapped to the action, and fluted for better in-field function. The firing pin is fluted for faster lock time and is fully supported within the bolt body. The bolt handle is threaded for the bolt knob of choice.

FEATURES:

• All action bodies use 416R stainless steel hardened to 41 Rockwell C.
• Remington 700 footprint configuration
• Black Iron Nitride QPQ style coating on bolt for smooth action and galling prevention. Bolt is also factory lapped. Bolts are spiral fluted.
• Rails incorporate anti-bind rail for smooth operation when sliding bolt across port cutout.
• Extended magazine cutout for use with HS Precision or Wyatt Outdoors extended magazines as well as factory Remington.
• Side bolt release which is positioned above the stock line
• Bead blasted matte finish.
• Bases secured with 8-40 screws and two anti-sheer pins
• Full round back and smaller port allow for a much stiffer action and perfect scope alignment.
• Pinned recoil lug
• Uses industry standard Remington style firing pin with 0.068 diameter.
• Mini M-16 style extractor
• Plunger ejector
• All actions use 1.0625-16 tpi, 0.700 inch headspace.
• All CNC machined.

SPECS:

• Receiver Material: 416 Stainless hardened to 42 Rockwell
• Receiver Length: SA - 7.850” / LA - 8.700"
• Receiver Diameter: 1.35” (Remington 700)
• Headspace: .700” Headspace tolerance is held to +/- .001”
• Tenon threads: Threads are made with a single-point boring bar and indexed to the top center of the action. This allows any barrel ever fitted to a Stiller Action to be screwed onto any other Stiller Action without any need for re-headspacing or re-indexing.
• Bolt Design: .700” diameter. One-piece fluted on top and sides but not the bottom so that flutes will not interfere with magazine lips. Predator actions have a swept bolt handle. They come with a small bolt knob that is threaded to accommodate aftermarket knobs.
• Bolt Stop: On side of the receiver opposite bolt handle above the stock line
• Bolt Throw: 90 degree
• Bolt Material: Chrome Molly hardened to 42 Rockwell
• Bolt Coating: Proprietary double layer coating makes them as smooth as glass
• Firing Pin: Fluted Stainless Steel, .068 diameter tip, Chrome silicon spring
• Extractor/Ejector: Modified M16 type extractor, Rem 700 style pin ejector
• Recoil Lug: 416R Stainless parallel sided or tapered. .187” (Rem 700 standard) or .300” produced in house and surface ground to .0002” tolerance.

BARREL: BARTLEIN CARBON FIBER BARREL

• 5R Single Point Cut rifling
• Match Grade Stainless Steel Core
• Carbon fiber resin tested stable at over 500 degrees F
• Industry Experts - Bartlein is always looking to expand their knowledge in the firearms field and improve firearms that are being designed and existing models. Everything from hand guns, bolt action hunting rifles, competition rifles and even machine guns. Their desire is to make the best and be the best.
• Unparalleled Precision - The uniformity in Bartlein's barrels and finish of the bores is second to none. Their rifling machines are so accurate, they can carry the twist rate to the 4th decimal point (example: 11.3642). The process of Single Point Cut Rifling is the most stress free way to rifle a barrel. The twist is exact, where as, other forms of rifling can have variances due to the process they use. Also, the bore and groove dimensions are more uniform.
• Top Quality - Bartlein pre-laps their barrels before rifling and finish lap the barrel after rifling. There is no need or under any circumstances, should you fire lap or do any other sort of bore polishing to the barrel. Contrary to what others say, a lapped barrel will not wear out earlier vs. an unlapped one. Bartlein barrels will typically last longer than a button barrel, etc.

BRAKE:

• Includes a Meraki Machine M1 3 port muzzle brake

THE OPTIONS

CALIBER: We list most of the most popular calibers and standard twist rates for them. If you need a different caliber or twist rate, select 'other' and we can definitely accommodate that.
BARREL OPTIONS: The most popular option is the #14 M24/M40 contour. It adds extra rigidity and better heat dissipation while only adding about 4 ounces. This barrel contour will drop into most of modern rifle stocks and chassis no problem, but there is a chance that it may be a little to big for some barrel channels. The #13 Varmint/Sendero contour, while not as popular anymore will drop into any stock with a Varmint style barrel channel. 
BARREL LENGTH: This can get pretty technical depending on what caliber you are shooting. Generally anything 22"-26" is pretty standard. If you plan on running a suppressor, we recommend going shorter at 20"-22", but if you are just going to use the muzzle brake only, then 24"-26" is your golden range. Please note: Barrel lengths longer than 26" may increase lead time.
COLOR: The next option is going to be your color. All colors are Cerakote ceramic firearms finishes and will handle any abuse you throw at it. Ultimately it will come down to your personal preference. Black is always a good go-to and matches everything. If you would like to choose a custom cerakote color, please input it into the color box when ordering. Camo patterns are available for an upcharge.

*Listed weights are before chambering. Weight will go down once chambering and crowning is completed.

Have questions or custom requests? Call us: 1-800-506-8244

***MUST SHIP TO A FFL***

• Red Hawk Rifles LLC. will transfer ownership of any firearm/receiver ONLY to individuals or agencies in possession of a valid Federal Firearms License (FFL). We cannot ship to individuals without a valid FFL.
• It is the buyer’s responsibility to check and comply with local, state, and federal laws. The buyer assumes all legality, liability and responsibility for the condition, use & security/storage of the firearm/receiver purchased.
• It is the buyer’s responsibility to contact the FFL dealer. Be aware that it is customary for your local dealer to charge a transaction fee at the time you pick up your purchase. This transfer fee is strictly between you and your local dealer. It is your responsibility to check with your local dealer concerning any policy of this kind and concerning your obligations.
• You the buyer are responsible for forwarding a copy of the FFL and all pertinent contact information to Red Hawk Rifles LLC. FFL’s can be sent to:

Email: sales@redhawkrifles.com
Fax: 970-242-6177

No reviews yet