Product Details
CFE-5
- This box is designed as an extended length center feed box for the Remington 700 Short Action.
- This box is for use with the WSM and RSAUM size cases. .284 cases will work as well. This box does not work well with standard size cartridge cases. IE .243, .308, etc.
- These boxes are sold with an F-7 follower.
- This box extends the O.A.L. of the ctg. approx. .110".
- Outside length is 3.070". Inside length is 2.995".
CFE-9
- This box is designed for belted magnums and larger cases in a Remington 700 Long Action.
- It is the center feed design, and allows for an O.A.L. of approx. 4.000".
- The receiver, bolt stop, and ejection port, must be altered to use this box.
- The box is sold with an F-10 follower.
- Outside length is 4.070". Inside length is 3.990".
CFE-12
- This box is designed for the longer standard ctgs. in a Remington 700 Long Action.
- It is the center feed design, and allows for a cartridge overall length of approx. 3.825".
- The receiver and bolt stop must be altered to use this box. Alteration is the same as used on the MBE-3 box.
- The box is sold with a flat plate follower.
- Outside length is 3.910". Inside length is 3.825".
CFE-13
- This box is designed for the standard ctgs. in a Remington 700 Long Action.
- It is the center feed design, and allows for a cartridge overall length of approx. 3.710".
- The box is sold with a flat plate follower.
- Outside length is 3.795". Inside length is 3.710"
Installation of these magazine boxes require modification to the receiver and bolt. These modifications should be done by a competent gunsmith.