Proof Research PXT carbon fiber barrel blank .30
At a glance
Full specificationsProof Research
Proof Research - PXT Carbon Fiber Barrel Blank - .30 Cal - Sendero Contour
Weekly Deal
Starting at
or 4 × with Sezzle
Your account pricing applied
Not sure it fits? Call 1-970-242-6166 — you’ll talk to an expert who works with these parts every day.
Lowest Price Guarantee
Found it cheaper? We’ll beat it.
We price match to the lowest advertised price from other authorized retailers — and we aim to beat them by 5%.
- Matched against authorized retailers only
- Based on the lowest advertised price
- We build on this gear ourselves — call and we’ll sort it out
Call 1-970-242-6166 or email sales@redhawkrifles.com with the competitor listing and we’ll take it from there. Read the full guarantee.
Goes with this
Complete the build
Overview
A .30 cal PXT Sendero carbon fiber blank, ready for your gunsmith to chamber
This Proof Research .30 Sendero blank pairs Proof's carbon fiber wrapped 416R stainless barrel with PXT (PROOF Exponential Twist) rifling. It is sold unchambered and unthreaded for your gunsmith to finish. Choose a 16.5", 18", 20", 22", 24" or 26" finish length and a 1:8, 1:9 or 1:10 twist. A 26" 1:9 version is also offered with a 1.25" shank for long actions that take a larger tenon.
PXT rifling
PXT starts the bullet on a very gradual twist and accelerates it through the bore. Proof says this cuts the initial rifling lead angle by about 95 to 98% and uses a smoother-edged land profile that lowers bullet engraving force by about 30%, for less pressure spike, less throat erosion and less felt torque.
30 to 100% longer barrel life
In Proof's controlled testing, PXT barrels showed a 30 to 100% increase in barrel life before measurable accuracy loss, with longer barrels seeing the most benefit. Proof also reports 20 to 50% smaller groups across multiple ammunition types and lots.
Up to 64% lighter than steel
Proof rates its carbon fiber barrels at up to 64% lighter than a steel barrel of similar contour. These blanks run 2 lb 6 oz to 3 lb 4 oz by Proof's published figures.
1.200" shank, 2.50" long
The shank runs 1.200" in diameter for 2.50" from the breech, then tapers to 1.0625" at 5.50" and 1.030" at 10". Those are the numbers to check against your stock's barrel channel.
Carbon fiber wrap
The 416R stainless core is wrapped in high-strength, aerospace-grade carbon fiber impregnated with a proprietary matrix resin. Proof cites improved heat dissipation for a cooler, longer lasting barrel.
Limited lifetime warranty
Proof warrants the barrel against defects in material and workmanship for the original owner. The warranty card must be on file with Proof within 30 days of delivery.
Specifications
Bore and rifling
Sendero contour, 1.200" shank (measured from the breech face)
1.250" shank version (26" 1:9)
Muzzle diameter by finish length (1.200" shank)
Weight by variant (Proof's figures)
What ships
Fitment
Will it work with your build?
Works with
- Any bolt action once the shank is threaded to the action's tenon
- Rem 700 footprint and most modern actions
- Cartridges: .308 Win, .300 Win Mag, .300 PRC, .300 WSM and similar .30 caliber cartridges
Will not work with
- Actions that cannot accept a 1.200" diameter shank (or 1.250" with the large-shank version)
- Cartridges larger than the .30 bore (use a .338 cal blank instead)
- Builds that need the barrel shortened past the finish length
Your gunsmith must thread, chamber and crown the blank, and the crown must be cut at Proof's witness ring. Proof's PXT gunsmithing guide says not to shorten the barrel beyond the witness ring (+/- .100"), and notes PXT lands are narrower at bore diameter than conventional lands, which matters if a range rod is used for alignment. Rifle barrels ship for a flat $14.95 per order, regardless of quantity, and do not qualify for free shipping due to their size and handling requirements.
Detail
Fitting it and the fine print
Which twist should I order?
A faster twist (lower number) stabilizes heavier, longer bullets. Check the bullet maker's twist recommendation for the rounds you plan to shoot before you order. The twist listed is Proof's PXT designation for the barrel; PXT starts slower at the breech and accelerates through the bore.
How is PXT different for my gunsmith?
The finish length is set by the witness ring, so pick the length you want to end up with. The crown is cut at that ring (+/- .100") and the barrel should not be cut shorter. Proof also offers a PXT logo file for gunsmiths who want to engrave the barrel.
Will it fit my stock's barrel channel?
Measure your barrel channel 10" from the breech face. The blank is 1.030" at 10", so a channel at least that wide at that point should fit. Check your action's tenon against the shank diameter too, and bring those numbers to your gunsmith.
How much accuracy should I expect?
Proof Research does not guarantee accuracy for a barrel blank sold alone. Chamber alignment, crown and how the barrel is fitted to the action matter as much as the barrel itself.
- Caliber
- .30
- Rifling
- PXT
- Contour
- Sendero
- Twists
- 1:8, 1:9, 1:10
- Lengths
- 16.5" to 26"
- Shank
- 1.200" x 2.50"
- Condition
- Blank (unchambered/unthreaded)
Works with
- Bolt actions with 1.200" or 1.250" diameter shank
- Rem 700 footprint and clones
- .308 Win, .300 Win Mag, .300 PRC and similar
Will not work with
- Actions smaller than the shank diameter
- Cartridges larger than .30 bore
Product images
Popular right now
What other builders are buying
-
Red Hawk Rifles
RHR Action Screw Set - Remington 700 BDL
$7.00View RHR Action Screw Set - Remington 700 BDL -
-
-
Shipping
Free same day shipping
Most orders over $199 ship free. We ship same day on all in-stock orders received before 14:00 Mountain Time. Free Shipping orders use standard ground and typically deliver in 1 to 4 days. Excludes international orders, Alaska and Hawaii, and select oversized items. All orders valued over $1,000.00 ship signature required.
Overnight & expedited shipping
If you need an item fast, cost-effective expedited options are available at checkout. Most expedited orders ship via FedEx or Overnight Mail.
Local customers
We are in 2317 Grand Park Dr Unit 2B Grand Junction, CO 81505 and we stock every item we sell. We love seeing customers and encourage you to stop by — just leave a comment in the order notes during checkout.
International shipping
We ship to international shoppers in 82 countries registered with EasyExport®. Registration is free and EasyExport does not share your information, and you can register before or after you shop. See International Export for details.
Returns
Not quite perfect? Red Hawk will make it right, no matter what. Guaranteed. Most items have a 30-day window from the day the product was delivered to you. Excluded are ammo and ORM-D products, custom ordered items, items not in original condition, and international orders. Every item we sell also carries a manufacturer warranty, and we only work with manufacturers who stand behind their products.
Common questions
How do I know the items I'm buying are compatible?
Check the Fitment section above — it lists what this part works with and what it does not. If you are still unsure, call 1-970-242-6166 or use the chat icon at the bottom right of the page — our team builds precision rifles with these parts every day.
Where are you located?
2317 Grand Park Dr Unit 2B Grand Junction, CO 81505. We ship every single order from our own warehouse and take pride in being part of our local hunting and competition shooting community.
I can't find the configuration I need — can you special order it?
Absolutely. Call 1-970-242-6166.
What if there is an issue with the product I ordered?
We will make it right, no matter what. We only carry products from top-tier manufacturers who stand behind them.
Which items need to ship to an FFL?
Receivers and actions, barreled actions, complete rifles and suppressors ship to a licensed FFL dealer. Barrels, stocks, triggers and accessories ship straight to your door.