null Skip to main content
1 / 5

Bix n' Andy

Bix n' Andy - Trigger - Tac Sport PRO-X (2 Stage) - Remington 700

Starting at

$400.00

or 4 ×   with Sezzle

Select options below, then Add to Cart

Stock shown once options are selected

Adding to cart… The item has been added
Ships straight to your door. No FFL transfer required for this part.
Lowest Price
Guarantee
Free Shipping Over $199
Easy Returns 30 days
Secure Checkout

Not sure it fits? Call 1-970-242-6166 — you’ll talk to an expert who works with these parts every day.

Experience superior trigger control with the Bix n' Andy Tac Sport PRO-X (2 Stage) Trigger for Remington 700. This two-stage trigger offers a smooth, adjustable pull for enhanced accuracy in competition.

Goes with this

Complete the build

Overview

Two-stage Rem 700 trigger, first stage takeup with second stage 2.5 oz to 1 lb break, ball-bearing mechanism

The Bix n' Andy TacSport PRO-X is a two-stage trigger for Remington 700 with adjustable second stage pull weight from 2.5 oz to 1 lb. The two-stage design provides initial takeup feedback on the first stage and a crisp, clean break on the second stage, both powered by a ball-bearing mechanism. Hand-fitted in Austria from stainless steel and precision-finished internals, it comes with removable safety and bolt release to match your action configuration and three trigger shoe options, left or right hand.

Two-stage ball-bearing trigger mechanism

First stage provides feedback and control during takeup. Second stage delivers a crisper break than friction designs and allows for clean shot release with minimal hesitation between stages.

Second stage 2.5 oz to 1 lb, adjustable

Set your final break weight to your preference over the available range. The two-stage design means the first stage takeup weight stays separate from this adjustment.

Stainless steel, hand-finished

The housing is elaborately machined and hand-polished. Stainless steel internals are precision-finished and assembled in Austria.

Three trigger shoe options

Smooth curved, Gator ribbed, or 90 Degree flat. All three come installed from the factory, so you choose the shoe that fits your finger.

Removable safety and bolt release

Both are standard on this trigger and removable if your action has its own release. Removable parts allow setup to match factory Rem 700 or clone actions.

Specifications

Trigger

TypeTwo stage with ball-bearing mechanism
Second stage pull weight2.5 oz to 1 lb, adjustable
MechanismBall bearing
SafetyRemovable, top right or top left
Bolt releaseRemovable, standard for OEM Rem 700
Over-travelBuilt in

Options and fit

Trigger shoeSmooth curved, Gator, or 90 Degree flat (installed from factory)
HandRight or left
Trigger studStandard 3.8 mm
SearStandard; low and high available by special request

Materials and construction

HousingStainless steel, elaborately machined
InternalsStainless steel, precision-finished
Weight70 grams
Dimensions50 x 50 mm
ManufactureHand-fitted and tested in Austria

Fitment

Will it work with your build?

Works with

  • Remington 700 actions: order With Bolt Release
  • Remington 700 footprint clone actions with integral bolt release: order Without Bolt Release
  • Right hand and left hand actions: select the Hand option that matches your rifle

Will not work with

  • Remington Model 7 (Bix n' Andy makes a separate Model 7 trigger)

Read this before ordering. The safety and bolt release on the TacSport PRO-X do not transfer from your old trigger. A factory Remington 700 needs the With Bolt Release version; if your action has its own bolt release in the receiver, order Without Bolt Release. The standard sear fits most Remington 700 actions. Low and high sear options are available by special request from Bix n' Andy if your action requires a different engagement height.

Detail

Fitting it and the fine print

Which bolt release option do I order?

With Bolt Release is for a factory Remington 700, where the bolt release lever on the trigger works the bolt catch in the receiver. Without Bolt Release is for Remington 700 clone actions that have their own release built into the receiver. Check your action: if it has a separate release lever on the receiver, order Without Bolt Release. If your action is a standard Rem 700 or direct clone without a receiver release, order With Bolt Release.

How do I adjust the second stage pull weight?

Adjustment is covered in Bix'n Andy's manual. Follow its steps rather than guessing, and repeat its safety checks after any change.

What is the difference between the first and second stage?

The first stage is the initial takeup weight you feel before the trigger mechanism engages for the break. The second stage is the final break weight you set when you adjust the trigger. The two-stage design lets you keep takeup feedback while dialing in a light break weight.

Can I use sears from my old trigger?

No. The TacSport PRO-X uses a standard sear and does not accept sears from other trigger designs. The standard sear is correct for most Remington 700 actions. Low and high sear options are available by special request from Bix n' Andy if your action requires a different engagement height, as a special order.

Type
Two stage
Second stage pull
2.5 oz to 1 lb
Mechanism
Ball bearing
Housing
Stainless steel
Weight
70 grams
Manufacture
Austria

Works with

  • Remington 700 actions
  • Rem 700 clones
  • Right or left hand

Will not work with

  • Remington Model 7

Popular right now

What other builders are buying

Shipping

Free same day shipping

Most orders over $199 ship free. We ship same day on all in-stock orders received before 14:00 Mountain Time. Free Shipping orders use standard ground and typically deliver in 1 to 4 days. Excludes international orders, Alaska and Hawaii, and select oversized items. All orders valued over $1,000.00 ship signature required.

Overnight & expedited shipping

If you need an item fast, cost-effective expedited options are available at checkout. Most expedited orders ship via FedEx or Overnight Mail.

Local customers

We are in 2317 Grand Park Dr Unit 2B Grand Junction, CO 81505 and we stock every item we sell. We love seeing customers and encourage you to stop by — just leave a comment in the order notes during checkout.

International shipping

We ship to international shoppers in 82 countries registered with EasyExport®. Registration is free and EasyExport does not share your information, and you can register before or after you shop. See International Export for details.

Returns

Not quite perfect? Red Hawk will make it right, no matter what. Guaranteed. Most items have a 30-day window from the day the product was delivered to you. Excluded are ammo and ORM-D products, custom ordered items, items not in original condition, and international orders. Every item we sell also carries a manufacturer warranty, and we only work with manufacturers who stand behind their products.

Read the full shipping and returns policy

Common questions

How do I know the items I'm buying are compatible?

Check the Fitment section above — it lists what this part works with and what it does not. If you are still unsure, call 1-970-242-6166 or use the chat icon at the bottom right of the page — our team builds precision rifles with these parts every day.

Where are you located?

2317 Grand Park Dr Unit 2B Grand Junction, CO 81505. We ship every single order from our own warehouse and take pride in being part of our local hunting and competition shooting community.

I can't find the configuration I need — can you special order it?

Absolutely. Call 1-970-242-6166.

What if there is an issue with the product I ordered?

We will make it right, no matter what. We only carry products from top-tier manufacturers who stand behind them.

Which items need to ship to an FFL?

Only serialized firearm actions and receivers require an FFL transfer. Barrels, stocks, triggers and accessories ship straight to your door.

View all FAQs Contact us

!