null Skip to main content
1 / 5

Bix n' Andy

Bix n' Andy - Trigger - Tac Sport PRO-X - Remington 700

Starting at

$375.00

or 4 ×   with Sezzle

Select options below, then Add to Cart

Stock shown once options are selected

Adding to cart… The item has been added
Ships straight to your door. No FFL transfer required for this part.
Lowest Price
Guarantee
Free Shipping Over $199
Easy Returns 30 days
Secure Checkout

Not sure it fits? Call 1-970-242-6166 — you’ll talk to an expert who works with these parts every day.

Elevate your precision shooting with the Bix n' Andy Tac Sport PRO-X Trigger for Remington 700. Known for its crisp pull and reliable performance, this trigger is a must-have for competitive shooters.

Goes with this

Complete the build

Overview

Single-stage Rem 700 trigger, adjustable 3.5 oz to 2.2 lb, ball-bearing break

The Bix n' Andy TacSport PRO-X is a single-stage trigger for Remington 700 with adjustable pull weight from 3.5 oz to 2.2 lb. It uses a ball-bearing mechanism for a clean break and is hand-fitted in Austria from aircraft-grade aluminum and stainless steel. Removable safety and bolt release let you match the configuration to your action, and it comes in three trigger shoe options, left or right hand.

3.5 oz to 2.2 lb pull weight, adjustable

Set to your preference over a wide range. The adjustable system lets you dial in the feel that suits your shooting style.

Ball-bearing trigger mechanism

The ball trigger provides a crisper break than friction designs and allows for very clean shot release with minimal take-up.

Aircraft-grade 7075 aluminum, blue anodized

The housing is strong, lightweight, and finished in cobalt blue. Stainless steel internals are precision-finished and hand-fitted.

Three trigger shoe options

90 Degree flat, Gator ribbed, or Wide Smooth. All three come installed from the factory, so the shoe fits your finger.

Removable safety and bolt release

Both are standard on this trigger and removable if your action has its own release. Removable parts allow setup to match factory Rem 700 or clone actions.

Specifications

Trigger

TypeSingle stage
Pull weight3.5 oz to 2.2 lb, adjustable
MechanismBall bearing
Take-upMinimal
SafetyRemovable, top right or top left
Bolt releaseRemovable, standard for OEM Rem 700

Options and fit

Trigger shoe90 Degree flat, Gator, or Wide Smooth (installed from factory)
HandRight or left
Trigger studStandard 3.8 mm
SearMedium 3.8 mm standard; low and high available by request

Materials and construction

HousingAircraft-grade 7075 aluminum, anodized cobalt blue
InternalsStainless steel, precision-finished
Weight70 grams
Dimensions50 x 50 mm
ManufactureHand-fitted in Austria

Fitment

Will it work with your build?

Works with

  • Remington 700 actions: order With Bolt Release
  • Remington 700 footprint clone actions with integral bolt release: order Without Bolt Release
  • Right hand and left hand actions: select the Hand option that matches your rifle

Will not work with

  • Remington Model 7 (Bix n' Andy makes a separate Model 7 trigger)

Read this before ordering. The safety and bolt release on the TacSport PRO-X do not transfer from your old trigger. A factory Remington 700 needs the With Bolt Release version; if your action has its own bolt release in the receiver, order Without Bolt Release. Low and high sear options are available by special request if your action requires them.

Detail

Fitting it and the fine print

Which bolt release option do I order?

With Bolt Release is for a factory Remington 700, where the bolt release lever on the trigger works the bolt catch in the receiver. Without Bolt Release is for Remington 700 clone actions that have their own release built into the receiver. Check your action: if it has a separate release lever on the receiver, order Without Bolt Release. If your action is a standard Rem 700 or direct clone without a receiver release, order With Bolt Release.

How do I adjust the pull weight?

Adjustment is covered in Bix'n Andy's manual. Follow its steps rather than guessing, and repeat its safety checks after any change.

Can I use sears from my old trigger?

No. The TacSport PRO-X uses a standard 3.8 mm sear and does not accept sears from other trigger designs. The standard medium sear is correct for most Remington 700 actions. Low and high sear options are available by special request from Bix n' Andy if your action requires a different engagement height, as a special order.

Pull weight
3.5 oz to 2.2 lb
Type
Single stage
Mechanism
Ball bearing
Housing
7075 aluminum, blue
Internals
Stainless steel
Weight
70 grams

Works with

  • Remington 700 actions
  • Rem 700 clones
  • Right or left hand

Will not work with

  • Remington Model 7

Popular right now

What other builders are buying

Shipping

Free same day shipping

Most orders over $199 ship free. We ship same day on all in-stock orders received before 14:00 Mountain Time. Free Shipping orders use standard ground and typically deliver in 1 to 4 days. Excludes international orders, Alaska and Hawaii, and select oversized items. All orders valued over $1,000.00 ship signature required.

Overnight & expedited shipping

If you need an item fast, cost-effective expedited options are available at checkout. Most expedited orders ship via FedEx or Overnight Mail.

Local customers

We are in 2317 Grand Park Dr Unit 2B Grand Junction, CO 81505 and we stock every item we sell. We love seeing customers and encourage you to stop by — just leave a comment in the order notes during checkout.

International shipping

We ship to international shoppers in 82 countries registered with EasyExport®. Registration is free and EasyExport does not share your information, and you can register before or after you shop. See International Export for details.

Returns

Not quite perfect? Red Hawk will make it right, no matter what. Guaranteed. Most items have a 30-day window from the day the product was delivered to you. Excluded are ammo and ORM-D products, custom ordered items, items not in original condition, and international orders. Every item we sell also carries a manufacturer warranty, and we only work with manufacturers who stand behind their products.

Read the full shipping and returns policy

Common questions

How do I know the items I'm buying are compatible?

Check the Fitment section above — it lists what this part works with and what it does not. If you are still unsure, call 1-970-242-6166 or use the chat icon at the bottom right of the page — our team builds precision rifles with these parts every day.

Where are you located?

2317 Grand Park Dr Unit 2B Grand Junction, CO 81505. We ship every single order from our own warehouse and take pride in being part of our local hunting and competition shooting community.

I can't find the configuration I need — can you special order it?

Absolutely. Call 1-970-242-6166.

What if there is an issue with the product I ordered?

We will make it right, no matter what. We only carry products from top-tier manufacturers who stand behind them.

Which items need to ship to an FFL?

Only serialized firearm actions and receivers require an FFL transfer. Barrels, stocks, triggers and accessories ship straight to your door.

View all FAQs Contact us

!