Stiller - Predator Receiver - Long Action
At a glance
Full specificationsStiller
Stiller - Predator Receiver - Long Action
Weekly Deal
Your account pricing applied
Not sure it fits? Call 1-970-242-6166 — you’ll talk to an expert who works with these parts every day.
Lowest Price Guarantee
Found it cheaper? We’ll beat it.
We price match to the lowest advertised price from other authorized retailers — and we aim to beat them by 5%.
- Matched against authorized retailers only
- Based on the lowest advertised price
- We build on this gear ourselves — call and we’ll sort it out
Call 1-970-242-6166 or email sales@redhawkrifles.com with the competitor listing and we’ll take it from there. Read the full guarantee.
Goes with this
Complete the build
Overview
Rem 700 footprint long action with 416R stainless and extended magazine well
The Stiller Predator is a long action receiver with a Remington 700 footprint, machined from 416R stainless hardened to 42 Rockwell. It is built for precision and hunting, with a forged single-piece fluted bolt, extended magazine well, and features that factory actions lack including an enlarged primary extraction camming surface and fully supported firing pin.
One-piece forged and fluted bolt
Hand lapped to the action, 0.700 inch diameter, hardened to 42 Rockwell with proprietary double-layer coating for glass-smooth operation.
Extended magazine well
Accommodates HS Precision and Wyatt Outdoors extended magazine boxes, as well as factory Remington magazines. Side bolt release positioned above the stock line for reliable operation.
Modified M16 type extractor
Uses the most dependable extractor available with an enlarged primary extraction camming surface and anti-bind rail for smooth bolt travel.
Precision headspace
Headspace held to 0.700 inch with plus or minus 0.001 inch tolerance. Tenon threads indexed to top center so any barrel fits any Predator without re-headspacing.
Full round back
Smaller port and full round back create a stiffer action and allow perfect scope alignment on your M5 inlet stock.
Fully supported firing pin
Fluted stainless steel firing pin 0.068 inch diameter with chrome silicon spring, fully supported within the bolt body for reliable ignition.
Specifications
Receiver
Headspace and Threading
Bolt and Firing
Magazine and Extraction
Fitment
Will it work with your build?
Works with
- M5 inlet stocks and chassis
- Remington 700 actions and clones
- HS Precision extended magazine boxes
- Wyatt Outdoors extended magazine boxes
Will not work with
- Blueprinted or tight tolerance stocks requiring factory action dimensions
- Firearms not legal in your jurisdiction (verify local, state and federal laws)
Receiver only. You will need a barrel fitted to your headspace and specification, bolt knob, scope bases and rings, and a stock. Verify your FFL dealer's transfer fees before ordering. Any buyer who receives this item is responsible for knowing and complying with all local, state and federal firearms regulations. Stiller receivers must be shipped to a Federal Firearms Licensed dealer.
Detail
Fitting it and the fine print
Which bolt face do I need to order for my caliber?
Long actions are available in two bolt faces: Standard for .308 Win and similar standard bolt face cartridges, and Magnum for magnum calibers like 7mm Remington Magnum and 300 Weatherby. Match the bolt face to the caliber you are planning to load, and select right hand or left hand to match your dominant hand.
What magazines work with the extended magazine well?
The extended magazine cutout accommodates HS Precision and Wyatt Outdoors extended magazine boxes, as well as factory Remington magazines. Verify magazine compatibility with your barrel and chamber before ordering.
Does this come as a complete rifle?
No. This is a receiver only. You will need to provide a barrel fitted to your headspace specification, a bolt knob, scope bases and rings, a stock inlet for M5, and have an FFL dealer handle the transfer. Stiller receivers cannot be shipped to individual addresses; they must ship to an FFL dealer.
- Length
- 8.700 inches
- Material
- 416R stainless
- Hardness
- 42 Rockwell
- Headspace tolerance
- \u00b1 0.001 inch
- Footprint
- Remington 700
- Bolt throw
- 90 degrees
Works with
- M5 inlet stocks
- Rem 700 and clones
- Extended magazine boxes
Will not work with
- Standard mag wells
- Non-M5 chassis
Product images
Popular right now
What other builders are buying
-
Red Hawk Rifles
RHR Action Screw Set - Remington 700 BDL
$7.00View RHR Action Screw Set - Remington 700 BDL -
-
-
Shipping
Free same day shipping
Most orders over $199 ship free. We ship same day on all in-stock orders received before 14:00 Mountain Time. Free Shipping orders use standard ground and typically deliver in 1 to 4 days. Excludes international orders, Alaska and Hawaii, and select oversized items. All orders valued over $1,000.00 ship signature required.
Overnight & expedited shipping
If you need an item fast, cost-effective expedited options are available at checkout. Most expedited orders ship via FedEx or Overnight Mail.
Local customers
We are in 2317 Grand Park Dr Unit 2B Grand Junction, CO 81505 and we stock every item we sell. We love seeing customers and encourage you to stop by — just leave a comment in the order notes during checkout.
International shipping
We ship to international shoppers in 82 countries registered with EasyExport®. Registration is free and EasyExport does not share your information, and you can register before or after you shop. See International Export for details.
Returns
Not quite perfect? Red Hawk will make it right, no matter what. Guaranteed. Most items have a 30-day window from the day the product was delivered to you. Excluded are ammo and ORM-D products, custom ordered items, items not in original condition, and international orders. Every item we sell also carries a manufacturer warranty, and we only work with manufacturers who stand behind their products.
Common questions
How do I know the items I'm buying are compatible?
Check the Fitment section above — it lists what this part works with and what it does not. If you are still unsure, call 1-970-242-6166 or use the chat icon at the bottom right of the page — our team builds precision rifles with these parts every day.
Where are you located?
2317 Grand Park Dr Unit 2B Grand Junction, CO 81505. We ship every single order from our own warehouse and take pride in being part of our local hunting and competition shooting community.
I can't find the configuration I need — can you special order it?
Absolutely. Call 1-970-242-6166.
What if there is an issue with the product I ordered?
We will make it right, no matter what. We only carry products from top-tier manufacturers who stand behind them.
Which items need to ship to an FFL?
Only serialized firearm actions and receivers require an FFL transfer. Barrels, stocks, triggers and accessories ship straight to your door.