null Skip to main content
1 / 2

TriggerTech

TriggerTech - Diamond Trigger - Tikka T3/T3X

Starting at

$324.99

or 4 ×   with Sezzle

Select options below, then Add to Cart

Stock shown once options are selected

Adding to cart… The item has been added
Ships straight to your door. No FFL transfer required for this part.
Lowest Price
Guarantee
Free Shipping Over $199
Easy Returns 30 days
Secure Checkout

Not sure it fits? Call 1-970-242-6166 — you’ll talk to an expert who works with these parts every day.

Experience top-tier precision with the TriggerTech Diamond Trigger for the Tikka T3/T3X! Designed for competitive shooters, it delivers a frictionless, consistent pull.

Goes with this

Complete the build

Overview

Single stage trigger for Tikka T3 and T3X, under 4 oz to 32 oz

The TriggerTech Diamond is a single stage trigger for Tikka T3, T3X and T1X actions, adjustable from under 4 oz to 32 oz with a zero creep break. It is sold for right hand actions with a removable safety, and this listing is the PVD black unit available with either a Curved or Flat lever.

Under 4 oz to 32 oz, adjustable

External adjustment via a set screw on the trigger body, set near the middle of the range at the factory. The exact pull weight depends on three things: the firing pin spring weight, the engagement geometry and your adjustment setting. A heavier than factory firing pin spring pushes the whole range up.

Zero creep, under .010" overtravel

Five critical components are assembled as a matched set. Zero Creep Technology does not rely on coating, polishing or lubricating the engagement surfaces, which is the manufacturer's reason the pull stays consistent shot to shot and after thousands of rounds.

Two levers, one finish

Curved with a traditional grip profile, or Flat with a straight edge for a different feel. Every Diamond is PVD black.

7075 aluminum housing, 440C internals

The housing is anodized 7075 aluminum and the key components are hardened 440C stainless steel. The PVD black finish is a physical vapor deposition coating on the external stainless parts.

CLKR Technology and matched components

Built with TriggerTech's proprietary systems for consistent trigger control and reliability, with five critical components assembled as a matched set.

Lifetime warranty

TriggerTech covers manufacturing defects for the life of the product and handles claims directly.

Specifications

Trigger

ActionSingle stage
Pull weightUnder 4 oz to 32 oz, adjustable
AdjustmentExternal set screw on trigger body
Factory settingNear the middle of the range
OvertravelUnder .010"
CreepZero Creep Technology
Other featuresCLKR Technology
Matched componentsFive, assembled as a set
SafetyIncluded, removable
HandRight

Options

LeverCurved or Flat
FinishPVD black

Materials

Housing7075 aluminum, anodized
Key components440C stainless steel, hardened
PVD blackPhysical vapor deposition coating on external stainless parts

Compatibility

PlatformTikka T3, T3X, T1X
Action typeBolt action
HandRight hand actions only

Care and warranty

LubricationNone required; keep oil and solvent off the trigger
WarrantyProduct lifetime against manufacturing defects, handled by TriggerTech
MaintenanceIf contaminated, flush with lighter fluid and blow dry with compressed air

Fitment

Will it work with your build?

Works with

  • Tikka T3 actions
  • Tikka T3X actions
  • Tikka T1X actions
  • Right hand actions
  • Rifles with a removable safety

Will not work with

  • Left hand actions: this listing is the right hand unit
  • Tikka actions that require a non-removable or integrated safety (if any)

Read this before ordering. This is the right hand unit; left hand actions require a different product. The safety is removable, so your old trigger's safety does not transfer. Pull weights are approximate and vary between actions; a heavier than factory firing pin spring can push the pull above 32 oz.

Detail

Fitting it and the fine print

How do I adjust the pull weight?

With the rifle unloaded, adjust the set screw on the trigger body. The exact pull weight depends on three things: the firing pin spring weight in your action, the engagement geometry (fixed by TriggerTech) and the adjustment you set. A heavier than factory firing pin spring pushes the whole range up, so if your measured weight reads above 32 oz, check the firing pin spring. TriggerTech recommends running the trigger at or above the factory setting until you have some time on it.

Does it need oil, and what can damage it?

No oil. The trigger is designed to run dry, and TriggerTech asks that gun oil and cleaning products be kept away from it; if it is contaminated, flush it with lighter fluid and blow it out with compressed air rather than opening the housing. Two things can damage it: a pierced primer or overpressure event, and closing the bolt on an improperly timed action.

Which lever do I order?

Curved has the traditional bent profile; Flat is straight-edged. All are PVD black. The trigger underneath is the same; the lever choice is about hand feel and how you lay your finger on it. The Flat lever lets you move your finger up or down to adjust the effective pull, while the Curved profile guides your finger to one spot.

Pull weight
Under 4 to 32 oz
Action
Single stage
Overtravel
Under .010"
Hand
Right
Safety
Included, removable
Warranty
Lifetime

Works with

  • Tikka T3 and T3X actions
  • Right hand actions
  • Removable safety rifles

Will not work with

  • Left hand actions
  • Actions requiring non-removable safety

Popular right now

What other builders are buying

Shipping

Free same day shipping

Most orders over $199 ship free. We ship same day on all in-stock orders received before 14:00 Mountain Time. Free Shipping orders use standard ground and typically deliver in 1 to 4 days. Excludes international orders, Alaska and Hawaii, and select oversized items. All orders valued over $1,000.00 ship signature required.

Overnight & expedited shipping

If you need an item fast, cost-effective expedited options are available at checkout. Most expedited orders ship via FedEx or Overnight Mail.

Local customers

We are in 2317 Grand Park Dr Unit 2B Grand Junction, CO 81505 and we stock every item we sell. We love seeing customers and encourage you to stop by — just leave a comment in the order notes during checkout.

International shipping

We ship to international shoppers in 82 countries registered with EasyExport®. Registration is free and EasyExport does not share your information, and you can register before or after you shop. See International Export for details.

Returns

Not quite perfect? Red Hawk will make it right, no matter what. Guaranteed. Most items have a 30-day window from the day the product was delivered to you. Excluded are ammo and ORM-D products, custom ordered items, items not in original condition, and international orders. Every item we sell also carries a manufacturer warranty, and we only work with manufacturers who stand behind their products.

Read the full shipping and returns policy

Common questions

How do I know the items I'm buying are compatible?

Check the Fitment section above — it lists what this part works with and what it does not. If you are still unsure, call 1-970-242-6166 or use the chat icon at the bottom right of the page — our team builds precision rifles with these parts every day.

Where are you located?

2317 Grand Park Dr Unit 2B Grand Junction, CO 81505. We ship every single order from our own warehouse and take pride in being part of our local hunting and competition shooting community.

I can't find the configuration I need — can you special order it?

Absolutely. Call 1-970-242-6166.

What if there is an issue with the product I ordered?

We will make it right, no matter what. We only carry products from top-tier manufacturers who stand behind them.

Which items need to ship to an FFL?

Only serialized firearm actions and receivers require an FFL transfer. Barrels, stocks, triggers and accessories ship straight to your door.

View all FAQs Contact us

!