Bartlein Barrels
Bartlein - Stainless Steel Barrel Blank - .22 Cal
At a glance
Full specificationsBartlein Barrels
Bartlein - Stainless Steel Barrel Blank - .22 Cal
Weekly Deal
Starting at
or 4 × with Sezzle
Your account pricing applied
Not sure it fits? Call 1-970-242-6166 — you’ll talk to an expert who works with these parts every day.
Lowest Price Guarantee
Found it cheaper? We’ll beat it.
We price match to the lowest advertised price from other authorized retailers — and we aim to beat them by 5%.
- Matched against authorized retailers only
- Based on the lowest advertised price
- We build on this gear ourselves — call and we’ll sort it out
Call 1-970-242-6166 or email sales@redhawkrifles.com with the competitor listing and we’ll take it from there. Read the full guarantee.
Goes with this
Complete the build
-
$449.00View Bartlein - Stainless Steel Barrel Blank - .25 Cal
-
-
Bartlein Barrels
Bartlein - Stainless Steel Barrel Blank - .30 Cal
$449.00View Bartlein - Stainless Steel Barrel Blank - .30 Cal -
Overview
A cut-rifled .22 centerfire match blank for a gunsmith to chamber and crown
The Bartlein .22 caliber stainless barrel blank is a single-point cut rifled 5R match blank for a gunsmith to chamber, thread and crown for your bolt action. It is offered in eight contours, four twist rates, and 26" or 28" lengths by contour. Any .22 centerfire cartridge can be chambered in it, from .223 Rem to .22-250.
Single-point cut rifled and hand lapped
Bartlein uses single-point cut rifling only, never a button, and hand laps every blank when it is finished. The .219" bore and .224" groove are Bartlein's standard .22 centerfire dimensions.
5R rifling, five lands
Five lands means no land sits directly opposite another, and the land sides are angled instead of the 90 degree corner of conventional rifling. Bartlein says the jacket distorts less on the jump into the rifling, and rates 5R at up to 5% less BC loss from jacket deformation.
Eight contours from Sporter to Match
Choose from the #3 Heavy Sporter, #4 Bull Sporter, #7 MTU Straight Taper, #11 Medium Palma, #12 Heavy Palma, #13 Varmint/Sendero, #14 M24/M40, or the 1.25" Straight Cylinder. Other contours are available to order.
Four twists: 1:6.5, 1:7, 1:7.7 and 1:12
Pick the twist for the bullets you plan to run and the cartridge you chamber. Heavier bullets and higher velocities need faster (lower ratio) twists; lighter bullets and lower velocities favour slower twists.
Ships 1" longer than the length you order
Bartlein makes every blank 1" over the chart length so the gunsmith can cut the bell mouth off the muzzle and crown it. Lengths on this page are 26" or 28" finished.
5R not recommended for light-for-caliber bullets
Bartlein notes that 5R does not work well with lightweight .22 bullets under 60 grains. If you plan to shoot 35 to 60 gr bullets, Bartlein can provide a conventional or 4-groove blank instead; contact them to order.
Specifications
Barrel
Contours offered
Fitment
Will it work with your build?
Works with
- .22 centerfire cartridges: .223 Rem, .22-250, .220 Swift, .224 Valkyrie (our record)
- Bolt action rifles, once a gunsmith has chambered, threaded, crowned and fitted it
- Suppressors on contours with 0.700" muzzle diameter or larger (#4, #7, #11, #12, #13, #14, Straight Cylinder)
- Muzzle threads of 1/2x28, 5/8x24 or 3/4x24, cut by your gunsmith
Will not work with
- Any rifle as shipped: this is a blank, not a pre-fit or drop-in barrel
- Pre-fit or gas gun installs: Bartlein makes no pre-fit or gas gun barrels
- Light-for-caliber bullets under 60 grains with 5R rifling (Bartlein recommends conventional rifling for 35 to 60 gr bullets)
Gunsmith fitting and a flat shipping charge. This blank must be chambered, threaded, crowned and installed by a certified gunsmith. Rifle barrels and barreled actions ship for a flat $14.95 per order regardless of quantity and do not qualify for free shipping.
Detail
Fitting it and the fine print
Which contour do I order?
Match the contour to the barrel channel of your stock or chassis and to the weight you want to carry. A heavier barrel resists moving as it heats, but that is mostly a button-rifled problem; cut rifling puts no stress into the blank, so a lighter Bartlein contour gives up less than you would expect. For a suppressor, Bartlein recommends a muzzle of 0.700" or more, which is the #4 Bull Sporter and up, and prefers a Palma or heavier. Other contours are available to order.
Which twist rate do I order?
Your choice of cartridge and bullet weight determines the twist you need. Heavier bullets and higher velocities need faster (lower ratio) twists; lighter bullets and lower velocities favour slower twists. The 1:7.7 and 1:7 are the most common for .223 Rem and .22-250 across a range of bullet weights. The 1:6.5 favours the heaviest .224 projectiles. The 1:12 works for the lightest bullets in low-velocity loads, but Bartlein notes that 5R does not work well with lightweight bullets under 60 grains, and recommends asking for conventional rifling if you shoot 35 to 60 gr.
What does 5R rifling mean?
Bartlein offers three rifling styles: 4-groove, 5R and Conventional-5, all single-point cut. This blank is 5R. In 5R the bore has five lands, so no land sits directly opposite another, and each land meets the groove on an angle instead of the 90 degree corner of conventional rifling. Bartlein says the bullet jacket distorts less as it enters the rifling, and quotes testing that puts BC loss from jacket deformation up to 5% lower. For .22 barrels, Bartlein's one exception is light-for-caliber bullets under 60 grains in .224 (35 to 60 gr), which they say do not like 5R; contact them to order conventional rifling if that is your load.
- Caliber
- .22
- Bore and groove
- .219" x .224"
- Rifling
- 5R single-point cut
- Twists
- 1:6.5 to 1:12
- Lengths
- 26" or 28"
- Steel
- Stainless
Works with
- .223 Rem, .22-250
- Bolt actions, gunsmith fitted
- Suppressors on .700" muzzle or larger
Will not work with
- Any rifle as shipped (blank)
- 35 to 60 gr bullets with 5R rifling
Product images
Popular right now
What other builders are buying
-
Red Hawk Rifles
RHR Action Screw Set - Remington 700 BDL
$7.00View RHR Action Screw Set - Remington 700 BDL -
-
-
Shipping
Free same day shipping
Most orders over $199 ship free. We ship same day on all in-stock orders received before 14:00 Mountain Time. Free Shipping orders use standard ground and typically deliver in 1 to 4 days. Excludes international orders, Alaska and Hawaii, and select oversized items. All orders valued over $1,000.00 ship signature required.
Overnight & expedited shipping
If you need an item fast, cost-effective expedited options are available at checkout. Most expedited orders ship via FedEx or Overnight Mail.
Local customers
We are in 2317 Grand Park Dr Unit 2B Grand Junction, CO 81505 and we stock every item we sell. We love seeing customers and encourage you to stop by — just leave a comment in the order notes during checkout.
International shipping
We ship to international shoppers in 82 countries registered with EasyExport®. Registration is free and EasyExport does not share your information, and you can register before or after you shop. See International Export for details.
Returns
Not quite perfect? Red Hawk will make it right, no matter what. Guaranteed. Most items have a 30-day window from the day the product was delivered to you. Excluded are ammo and ORM-D products, custom ordered items, items not in original condition, and international orders. Every item we sell also carries a manufacturer warranty, and we only work with manufacturers who stand behind their products.
Common questions
How do I know the items I'm buying are compatible?
Check the Fitment section above — it lists what this part works with and what it does not. If you are still unsure, call 1-970-242-6166 or use the chat icon at the bottom right of the page — our team builds precision rifles with these parts every day.
Where are you located?
2317 Grand Park Dr Unit 2B Grand Junction, CO 81505. We ship every single order from our own warehouse and take pride in being part of our local hunting and competition shooting community.
I can't find the configuration I need — can you special order it?
Absolutely. Call 1-970-242-6166.
What if there is an issue with the product I ordered?
We will make it right, no matter what. We only carry products from top-tier manufacturers who stand behind them.
Which items need to ship to an FFL?
Only serialized firearm actions and receivers require an FFL transfer. Barrels, stocks, triggers and accessories ship straight to your door.